The objective is to make Industrial Engineering more effective. Industrial Engineering needs a Revolution. Industrial Engineering is about Optimisation. However presently this optimization is only applied to factory set up. Optimisation is needed everywhere. And Optimisation must be applied in a creative way and not by predetermined procedures. Finally Optimisation needs to be seen as a mindset and not as a methodology. Basically Industrial Engineering needs drastic changes in 3 different directions. Firstly Industrial Engineering needs to get applied everywhere. Secondly Industrial Engineering needs to be understood as a Mindset, not as a Methodology. Finally Industrial Engineering needs to be become more creative, with lots of ideas. And this change has to happen fast and quickly. Hence it can only be termed as a revolution. Academicians in Industrial Engineering must shed their inhibitions and embrace the fact that Optimisation is needed everywhere. Secondly Optimisation can be done in a creative manner. Finally, Optimisation is a Mindset and cannot be reduced to a Methodology. Of course there could be resistance to change. But change is progress. After all even Industrial Engineering invention and discovery was a change. Hence this break from past in Industrial Engineering is a change that needs to be embraced and welcomed. It requires unshackled mind and free spirit to incite and instigate a Revolution in Industrial Engineering.
| Published in | Industrial Engineering (Volume 6, Issue 2) |
| DOI | 10.11648/j.ie.20220602.11 |
| Page(s) | 19-22 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Industrial Engineering, Revolution, Creative, Common Sense, Comfort Zone
| [1] | Deshpande Prabhakar, Common Sense Industrial Engineering, International Journal for Advances in Engineering and Management Volume 4 Issue 7 July 2022 www.ijaem.net |
| [2] | Deshpande Prabhakar, Down to Earth Industrial Engineering, Proceedings of SARC International Conference, New Delhi, India, 22nd July 2022. |
| [3] | Khan M I (2004), Industrial Engineering, New Age International Publishers, 2nd edition. |
| [4] | Telsang Martand (2006), Industrial Engineering and Production Management, S Chand Publishings. |
| [5] | Bhatia Anmol (2014), Industrial Engineering and Operations Management, S K Kataria and Sons. |
| [6] | Sharma S C, Banga T R (2017), Industrial Engineering and Management, Khanna Publishing. |
| [7] | Khanna O P (2018), Industrial Engineering and Management, Dhanpat Rai Publications. |
| [8] | Reddy C Nadha Muni (2002), Industrial Engineering and Management, New Age International Publishers. |
| [9] | Viswanath Arun (2015), Industrial Engineering and Management, Scitech Publications. |
| [10] | Simant, Kumar, Prashant (2012), Industrial Engineering, New Age International. |
| [11] | Navale Vijay (2020), Industrial Engineering and Management, Tech Neo Publications. |
| [12] | Khan M I, Siddaqui (2018), Industrial Engineering and Management, New Age International Publishers. |
| [13] | Sarkar Prasanta (2021), Industrial Engineering Digest, Online Clothing Study. |
| [14] | Chatterjee Abhijit (2012), Industrial Engineering and Management, Vayu Education of India. |
| [15] | Gadhave Subhash (2021), Industrial Engineering, Technical Publications. |
APA Style
Prabhakar Deshpande. (2022). Revolution Needed in Industrial Engineering to Make It More Effective. Industrial Engineering, 6(2), 19-22. https://doi.org/10.11648/j.ie.20220602.11
ACS Style
Prabhakar Deshpande. Revolution Needed in Industrial Engineering to Make It More Effective. Ind. Eng. 2022, 6(2), 19-22. doi: 10.11648/j.ie.20220602.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ie.20220602.11,
author = {Prabhakar Deshpande},
title = {Revolution Needed in Industrial Engineering to Make It More Effective},
journal = {Industrial Engineering},
volume = {6},
number = {2},
pages = {19-22},
doi = {10.11648/j.ie.20220602.11},
url = {https://doi.org/10.11648/j.ie.20220602.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ie.20220602.11},
abstract = {The objective is to make Industrial Engineering more effective. Industrial Engineering needs a Revolution. Industrial Engineering is about Optimisation. However presently this optimization is only applied to factory set up. Optimisation is needed everywhere. And Optimisation must be applied in a creative way and not by predetermined procedures. Finally Optimisation needs to be seen as a mindset and not as a methodology. Basically Industrial Engineering needs drastic changes in 3 different directions. Firstly Industrial Engineering needs to get applied everywhere. Secondly Industrial Engineering needs to be understood as a Mindset, not as a Methodology. Finally Industrial Engineering needs to be become more creative, with lots of ideas. And this change has to happen fast and quickly. Hence it can only be termed as a revolution. Academicians in Industrial Engineering must shed their inhibitions and embrace the fact that Optimisation is needed everywhere. Secondly Optimisation can be done in a creative manner. Finally, Optimisation is a Mindset and cannot be reduced to a Methodology. Of course there could be resistance to change. But change is progress. After all even Industrial Engineering invention and discovery was a change. Hence this break from past in Industrial Engineering is a change that needs to be embraced and welcomed. It requires unshackled mind and free spirit to incite and instigate a Revolution in Industrial Engineering.},
year = {2022}
}
TY - JOUR T1 - Revolution Needed in Industrial Engineering to Make It More Effective AU - Prabhakar Deshpande Y1 - 2022/11/10 PY - 2022 N1 - https://doi.org/10.11648/j.ie.20220602.11 DO - 10.11648/j.ie.20220602.11 T2 - Industrial Engineering JF - Industrial Engineering JO - Industrial Engineering SP - 19 EP - 22 PB - Science Publishing Group SN - 2640-1118 UR - https://doi.org/10.11648/j.ie.20220602.11 AB - The objective is to make Industrial Engineering more effective. Industrial Engineering needs a Revolution. Industrial Engineering is about Optimisation. However presently this optimization is only applied to factory set up. Optimisation is needed everywhere. And Optimisation must be applied in a creative way and not by predetermined procedures. Finally Optimisation needs to be seen as a mindset and not as a methodology. Basically Industrial Engineering needs drastic changes in 3 different directions. Firstly Industrial Engineering needs to get applied everywhere. Secondly Industrial Engineering needs to be understood as a Mindset, not as a Methodology. Finally Industrial Engineering needs to be become more creative, with lots of ideas. And this change has to happen fast and quickly. Hence it can only be termed as a revolution. Academicians in Industrial Engineering must shed their inhibitions and embrace the fact that Optimisation is needed everywhere. Secondly Optimisation can be done in a creative manner. Finally, Optimisation is a Mindset and cannot be reduced to a Methodology. Of course there could be resistance to change. But change is progress. After all even Industrial Engineering invention and discovery was a change. Hence this break from past in Industrial Engineering is a change that needs to be embraced and welcomed. It requires unshackled mind and free spirit to incite and instigate a Revolution in Industrial Engineering. VL - 6 IS - 2 ER -
Information
Email: