Research Article | | Peer-Reviewed

Evaluation of Noise Pollution Level in Selected Sawmill Factories in Port Harcourt and Environs, Rivers State, Nigeria

Received: 2 February 2024     Accepted: 26 February 2024     Published: 19 March 2024
Views:       Downloads:
Abstract

Evaluation of noise pollution level has been carried out in in some selected Sawmill factories in Port Harcourt and environs using noise level and frequency meters in seven locations. The mean values of maximum and minimum sound levels in Mile2, Mile3, Marine base, Oluwood were 81.98±0.43 and 79.28±2.00, 82.450±0.66 and 80.28±0.80, 81.50±4.73 and 74.75±1.10, 81.40±0.40 and 78.03±2.02 respectively. Also the mean values of maximum and minimum sound levels at Igwuruta, Rumosi, Rumuji were found to be 82.00±0.64 and 79.40±2.00, 81.53±0.60 and 78.66±1.63, 81.78±0.40 and 77.95±1.86 respectively. The average noise equivalent (Leq) ranged from 77.20 to 82.25 dB whereas the average noise pollution level (Lnp) ranged from 96.13 to 101.23 dB. Therefore, the indication is that the Sawmill at Igwuruta has the highest average Lnp whereas Rumuosi has the least average when compared with the recommend permissible value by the Nigerian Federal Ministry of Environment (FMEnv). This study has determined the noise level generated in study area through set objectives which included but not limited to measuring the sound level, investigating noise some meters away from the source and of course comparing results with best known standards. The results therefore suggested that the noise level is high at the saw mills and the day exposure to this unwanted sound could threaten the health of the factory workers and the residents at proximity to the noise sources.

Published in American Journal of Environmental Science and Engineering (Volume 8, Issue 1)
DOI 10.11648/j.ajese.20240801.11
Page(s) 1-8
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Evaluation, Health Effect, Noise, Pollution Level, Sawmill

References
[1] Peippo, M., Hakkala, M., Heikkienen, M. (2000). Road traffic Noise: Turku urban area PSSD Task report Baltic Region Healthy cities office, Regional Council of Southwest Finland, p. 26.
[2] Bruel, M. and KjaerT. S, (2000). Environmental Noise. Copenhagen, Denmark.
[3] Ify L. N. and Owate O. I, (2000) Noise pollution modeling of Port Harcourt refinery part -2 NSE Tech-Trans 35(1): 92-101.
[4] Greenwell K, Sereda M, Coulson N, Hoare DJ (2016). Understanding User Reactions and Interactions with an Internet-Based Intervention for Tinnitus Self-Management: Mixed-Methods Process Evaluation Protocol. JMIR Res. Protoc. 5(1): edd. 49.
[5] Omubo - People V. B., Israel - Cooley C. and Alaminokuma G. I., (2009). Effects of Noise – Induced Hearing Loss within Port- Harcourt Metropolis, Nigeria. Journal of theNigerian Association of Mathematical Physics. Vol. 14. 439-448.
[6] Avwiri, G. O and Nte, F., (2003). Environmental sound quality of some selected flow stations in the Niger Delta. J. Appl. Sci Environ. Mgt. 7(2): 75-77.
[7] Ebeniro J. O., and Abumere O. E., (1999) Environmental noise assessment of an industrial plant. Nig. J. Physics 11: 40-45.
[8] Harris, CM (1957). Handbook of Noise Control. New York: McGraw-Hill: 22-31.
[9] Ohwo, O. and Abotutu, A. A, (2015). Urban Noise Pollution in Nigerian Cities: Imperatives for Abatement. British Journal of Applied Science & Technology 10(6): 1-9, 2015, Article no. BJAST.18466 ISSN: 2231-0843.
[10] Dimou, V., (2014). Noise measurements in timber industries, Institute of timber harvest, Greece. 65(3): 243-249.
[11] Ejedewa, J. E., (1981). Patterns of incidence of oil reserves in Niger Delta basin. America Association of Petroleum Geologists, (65), 1574-1585.
[12] Owate, O. I., Avwiri, G. O. and Ogobiri, G. E., 2005. Studies of Noise reduction techniques using sound barrier systems. Int. J. Pure and Appl. Sci 4 (1, 2) 60-66, Scientia Africana.
[13] Manojkumar, N., Basha, K, and Srimuruganandam, B. (2019). Assessment, Prediction and Mapping of Noise levels in Vellore City India. Noise Mapp. 6(1) 38-51, https://doi.org/10.1515/noise
[14] Federal Ministry of Environment/ Federal Environmental Protection Agency FEPA, (1991). Guidelines and standard for industrial noise. FEPA, P52.
Cite This Article
  • APA Style

    Anekwe, U., Avwiri, G. (2024). Evaluation of Noise Pollution Level in Selected Sawmill Factories in Port Harcourt and Environs, Rivers State, Nigeria. American Journal of Environmental Science and Engineering, 8(1), 1-8. https://doi.org/10.11648/j.ajese.20240801.11

    Copy | Download

    ACS Style

    Anekwe, U.; Avwiri, G. Evaluation of Noise Pollution Level in Selected Sawmill Factories in Port Harcourt and Environs, Rivers State, Nigeria. Am. J. Environ. Sci. Eng. 2024, 8(1), 1-8. doi: 10.11648/j.ajese.20240801.11

    Copy | Download

    AMA Style

    Anekwe U, Avwiri G. Evaluation of Noise Pollution Level in Selected Sawmill Factories in Port Harcourt and Environs, Rivers State, Nigeria. Am J Environ Sci Eng. 2024;8(1):1-8. doi: 10.11648/j.ajese.20240801.11

    Copy | Download

  • @article{10.11648/j.ajese.20240801.11,
      author = {Uzo Anekwe and Gregory Avwiri},
      title = {Evaluation of Noise Pollution Level in Selected Sawmill Factories in Port Harcourt and Environs, Rivers State, Nigeria},
      journal = {American Journal of Environmental Science and Engineering},
      volume = {8},
      number = {1},
      pages = {1-8},
      doi = {10.11648/j.ajese.20240801.11},
      url = {https://doi.org/10.11648/j.ajese.20240801.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajese.20240801.11},
      abstract = {Evaluation of noise pollution level has been carried out in in some selected Sawmill factories in Port Harcourt and environs using noise level and frequency meters in seven locations. The mean values of maximum and minimum sound levels in Mile2, Mile3, Marine base, Oluwood were 81.98±0.43 and 79.28±2.00, 82.450±0.66 and 80.28±0.80, 81.50±4.73 and 74.75±1.10, 81.40±0.40 and 78.03±2.02 respectively. Also the mean values of maximum and minimum sound levels at Igwuruta, Rumosi, Rumuji were found to be 82.00±0.64 and 79.40±2.00, 81.53±0.60 and 78.66±1.63, 81.78±0.40 and 77.95±1.86 respectively. The average noise equivalent (Leq) ranged from 77.20 to 82.25 dB whereas the average noise pollution level (Lnp) ranged from 96.13 to 101.23 dB. Therefore, the indication is that the Sawmill at Igwuruta has the highest average Lnp whereas Rumuosi has the least average when compared with the recommend permissible value by the Nigerian Federal Ministry of Environment (FMEnv). This study has determined the noise level generated in study area through set objectives which included but not limited to measuring the sound level, investigating noise some meters away from the source and of course comparing results with best known standards. The results therefore suggested that the noise level is high at the saw mills and the day exposure to this unwanted sound could threaten the health of the factory workers and the residents at proximity to the noise sources.
    },
     year = {2024}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Evaluation of Noise Pollution Level in Selected Sawmill Factories in Port Harcourt and Environs, Rivers State, Nigeria
    AU  - Uzo Anekwe
    AU  - Gregory Avwiri
    Y1  - 2024/03/19
    PY  - 2024
    N1  - https://doi.org/10.11648/j.ajese.20240801.11
    DO  - 10.11648/j.ajese.20240801.11
    T2  - American Journal of Environmental Science and Engineering
    JF  - American Journal of Environmental Science and Engineering
    JO  - American Journal of Environmental Science and Engineering
    SP  - 1
    EP  - 8
    PB  - Science Publishing Group
    SN  - 2578-7993
    UR  - https://doi.org/10.11648/j.ajese.20240801.11
    AB  - Evaluation of noise pollution level has been carried out in in some selected Sawmill factories in Port Harcourt and environs using noise level and frequency meters in seven locations. The mean values of maximum and minimum sound levels in Mile2, Mile3, Marine base, Oluwood were 81.98±0.43 and 79.28±2.00, 82.450±0.66 and 80.28±0.80, 81.50±4.73 and 74.75±1.10, 81.40±0.40 and 78.03±2.02 respectively. Also the mean values of maximum and minimum sound levels at Igwuruta, Rumosi, Rumuji were found to be 82.00±0.64 and 79.40±2.00, 81.53±0.60 and 78.66±1.63, 81.78±0.40 and 77.95±1.86 respectively. The average noise equivalent (Leq) ranged from 77.20 to 82.25 dB whereas the average noise pollution level (Lnp) ranged from 96.13 to 101.23 dB. Therefore, the indication is that the Sawmill at Igwuruta has the highest average Lnp whereas Rumuosi has the least average when compared with the recommend permissible value by the Nigerian Federal Ministry of Environment (FMEnv). This study has determined the noise level generated in study area through set objectives which included but not limited to measuring the sound level, investigating noise some meters away from the source and of course comparing results with best known standards. The results therefore suggested that the noise level is high at the saw mills and the day exposure to this unwanted sound could threaten the health of the factory workers and the residents at proximity to the noise sources.
    
    VL  - 8
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Physics, Federal University Otuoke, Ogbia, Nigeria

  • Department of Physics, University of Port Harcourt, Port Harcourt, Nigeria

  • Sections