| Peer-Reviewed

Numerical Simulation of Thermo Mechanical Fatigue Phenomenom and Damage Evolution Bihaviour 5182 H111 Aluminium Alloy

Received: 27 June 2015     Accepted: 9 July 2015     Published: 18 July 2015
Views:       Downloads:
Abstract

The paper present results of a numerical modelling of ductile fracture and failure of elements made of 5182H111 aluminum alloy subjected to dynamic traction. The analysis was performed using Johnson-Cook model based ABAQUS software. The infrared thermography was used to quantify deformation localization zones, also to relate the temperature changes of the specimen, continuously recorded by thermography, with the load extension diagram. The aim of the research was to specify and test the mechanical properties during numerical simulation. The experimental test results for the mechanical properties of the studies are presented with a large description of the testing facilities. The test results were used to determine the temperature dependencies of the mechanical properties, yield strength, modulus of elasticity and thermal elongation

Published in International Journal of Materials Science and Applications (Volume 4, Issue 4)
DOI 10.11648/j.ijmsa.20150404.18
Page(s) 272-276
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

Mechanical Properties, Material Fatigue, Damage, Aluminum Alloy, Johnson-Cook Model

References
[1] M. Abendroth, M.kuna, ‘’ determination of deformation and failure properties of ductile materials by means of the small punch test and neural networks’’, computational materials Science 28(2003) 633-644.
[2] V.vely,G.bernhart and L.penezzi,A.Persson and J.Bergström, ‘’thermal fatigue of tools steel: experiment and numerical simulation’’, 6 th international tooling conference.
[3] Bauvineau, L., Burlet, H., Eripret, C. and Pineau, A.: Modelling ductile stable crack growth in a CMn steel with local approaches, in: Proceedings of the first European Mechanics of Materials Conference on Local Approach to Fracture, 09- 11.09.1996, Fontainebleau, France, pp. 26-38.
[4] Bashir Younise, Marko Rakin, Bojan Medjo, Aleksandar Sedmak ‘’Numerical Simulation for Studying Constraint Effect on Ductile Fracture Initiation Using Complete Gurson Model’’ FME Transactions, 200 ▪ VOL. 38, No 4, 2010.
[5] R.Kopp, M.L.Cao and M.M.Souza, ‘’Multi-level simulation of metal forming process’’, Proc. 2nd ITCP, Stuttgart, August 1987, pp.1128-1234.
[6] W.Johnson, ’’Developments in forming technology-an engineering educator’s appoach’’, Journal of materials processing technology, vol.31, pp.1-26, 1992.
[7] F.Mata Cabrera, J.Tejero Manzanares, I.Hanafi, A.B.Arenas, I.Garrido, V.Toledano, M.L.Rubio, “Investigation the deformation and damage scenario under tensile loading of ductile specimens using thermography,” Int.Rev.Appl.Sci.Eng.5(2014), 1,1–8.
[8] A. El-Azrab, M.Garnich, A.Kapoor,”Modeling of the electromagnetic forming of sheet metals: state – of-the-art and future needs’’,Journal of materials Processing technology, vol.142,2003,pp.744-754.
[9] Johnson GR, Cook W.H. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Engng Fract Mech, 1985; 21: 31-48.
[10] Johnson G. R. & Cook W.H., A constitutive model and data for metals subjected to large strain, high strain rate and high temperature,7th int. symp. Ballistics, pp.541-547,1983.
[11] Rafal olaf smerd, Constutivie behavior of aluminum alloy sheet at high strain rates , thesis Presented to the university waterloo, Ontario,Canada 2005 50th.
[12] Achraf Zineb, khamlichi Abdellatif, Francisco Mata Cabrera, ‘’ Effects of cycle duration and phasing on thermomechanical Fatigue of Dog-Bone specimens Made form steel’’American J. of Engineering and applied Sciences 3(4), 740-748 ,2010.
Cite This Article
  • APA Style

    Abdelouahid El Amri, Mounir El Yakhloufi haddou, Issam hanafi, Francisco Mata Cabrera. (2015). Numerical Simulation of Thermo Mechanical Fatigue Phenomenom and Damage Evolution Bihaviour 5182 H111 Aluminium Alloy. International Journal of Materials Science and Applications, 4(4), 272-276. https://doi.org/10.11648/j.ijmsa.20150404.18

    Copy | Download

    ACS Style

    Abdelouahid El Amri; Mounir El Yakhloufi haddou; Issam hanafi; Francisco Mata Cabrera. Numerical Simulation of Thermo Mechanical Fatigue Phenomenom and Damage Evolution Bihaviour 5182 H111 Aluminium Alloy. Int. J. Mater. Sci. Appl. 2015, 4(4), 272-276. doi: 10.11648/j.ijmsa.20150404.18

    Copy | Download

    AMA Style

    Abdelouahid El Amri, Mounir El Yakhloufi haddou, Issam hanafi, Francisco Mata Cabrera. Numerical Simulation of Thermo Mechanical Fatigue Phenomenom and Damage Evolution Bihaviour 5182 H111 Aluminium Alloy. Int J Mater Sci Appl. 2015;4(4):272-276. doi: 10.11648/j.ijmsa.20150404.18

    Copy | Download

  • @article{10.11648/j.ijmsa.20150404.18,
      author = {Abdelouahid El Amri and Mounir El Yakhloufi haddou and Issam hanafi and Francisco Mata Cabrera},
      title = {Numerical Simulation of Thermo Mechanical Fatigue Phenomenom and Damage Evolution Bihaviour 5182 H111 Aluminium Alloy},
      journal = {International Journal of Materials Science and Applications},
      volume = {4},
      number = {4},
      pages = {272-276},
      doi = {10.11648/j.ijmsa.20150404.18},
      url = {https://doi.org/10.11648/j.ijmsa.20150404.18},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20150404.18},
      abstract = {The paper present results of a numerical modelling of ductile fracture and failure of elements made of 5182H111 aluminum alloy subjected to dynamic traction. The analysis was performed using Johnson-Cook model based ABAQUS software. The infrared thermography was used to quantify deformation localization zones, also to relate the temperature changes of the specimen, continuously recorded by thermography, with the load extension diagram. The aim of the research was to specify and test the mechanical properties during numerical simulation. The experimental test results for the mechanical properties of the studies are presented with a large description of the testing facilities. The test results were used to determine the temperature dependencies of the mechanical properties, yield strength, modulus of elasticity and thermal elongation},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Numerical Simulation of Thermo Mechanical Fatigue Phenomenom and Damage Evolution Bihaviour 5182 H111 Aluminium Alloy
    AU  - Abdelouahid El Amri
    AU  - Mounir El Yakhloufi haddou
    AU  - Issam hanafi
    AU  - Francisco Mata Cabrera
    Y1  - 2015/07/18
    PY  - 2015
    N1  - https://doi.org/10.11648/j.ijmsa.20150404.18
    DO  - 10.11648/j.ijmsa.20150404.18
    T2  - International Journal of Materials Science and Applications
    JF  - International Journal of Materials Science and Applications
    JO  - International Journal of Materials Science and Applications
    SP  - 272
    EP  - 276
    PB  - Science Publishing Group
    SN  - 2327-2643
    UR  - https://doi.org/10.11648/j.ijmsa.20150404.18
    AB  - The paper present results of a numerical modelling of ductile fracture and failure of elements made of 5182H111 aluminum alloy subjected to dynamic traction. The analysis was performed using Johnson-Cook model based ABAQUS software. The infrared thermography was used to quantify deformation localization zones, also to relate the temperature changes of the specimen, continuously recorded by thermography, with the load extension diagram. The aim of the research was to specify and test the mechanical properties during numerical simulation. The experimental test results for the mechanical properties of the studies are presented with a large description of the testing facilities. The test results were used to determine the temperature dependencies of the mechanical properties, yield strength, modulus of elasticity and thermal elongation
    VL  - 4
    IS  - 4
    ER  - 

    Copy | Download

Author Information
  • Condensed matter, radiation and numerical simulation laboratory, Faculty of Sciences, Tetouan, Morocco

  • Condensed matter, radiation and numerical simulation laboratory, Faculty of Sciences, Tetouan, Morocco

  • National School of Applied Sciences d’Al Hoceima (ENSAH), Hoceima, Morocco

  • University polytechnic School of Mining and Industrial Engineering of Almaden, Almaden, Spain

  • Sections