The characteristics and application of poly ether ether ketone (PEEK) has been reviewed in the paper. The tribological modification of PEEK composites which were reinforced by inorganic fillers, the fiber, polymer blends, plasma and mixed modification were introduced. Finally research progress of tribological modification of PEEK composites was forecasted.
| Published in | International Journal of Materials Science and Applications (Volume 5, Issue 2) |
| DOI | 10.11648/j.ijmsa.20160502.21 |
| Page(s) | 102-107 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2016. Published by Science Publishing Group |
Polyetheretherketone, Modify, Composites, Tribological Property
| [1] | X. M. Wang, G. L. Qi, J. T. Cai, Y. L. Zhang. Progress modified PEEK [J] Engineering Plastics Application, 2009, 37(2): 80-83. |
| [2] | Y. W. Li. Advances in poly (ether ether ketone)-based composites [J]. New Chemical Materials, 2009, 37(3), 37-39. |
| [3] | Y. F. LI, X. M. WU. Application and development prospect of special engineering plastics PEEK [J]. Chemical Propellants & Polymeric Materials, 2005, 3(3): 7-11. |
| [4] | Z. C. Ni. Development and application of domestic and foreign PEEK [J]. World Plastics, 2013, 31(10): 32-36. |
| [5] | Z. S. Tan, J. Li. A Study on performance of PEEK materials and use of themin food packaging and beverage machinery industries [J]. Beverage Industry, 2014, 17, 39-42. |
| [6] | G. T. Fu, H. J. Liu, et al. PEEK properties and applications [J]. engineering plastics application, 2006, 34(10): 69-71. |
| [7] | E. Z. LI, W. L. Guo, et al. Progress of tribological modification and application of PEEK [J]. Journal of Materials Engineering, 2013(1): 91-96. |
| [8] | M. Yang, Luo shi kai, et al. Application of whiskers in polymer composites [J]. Materials Review, 2014, 28(3): 51-55. |
| [9] | J. P. Peng, W. S. Zhou, ei al. Whiskers mechanism and its application in composites [J]. Journal of Saltlake Research, 2005, 13(2): 1-6. |
| [10] | F. W. Cheng, J. Qi, Z. J. Zhang. research progress on Wear-Resisting modification of PEEK [J]. Engineering Plastics Application, 2014, 42(1): 126-129. |
| [11] | Y. Z. Meng, Y. Shen, et al. Modified potassium titanate whisker and its application in composites [J]. ShanDong Ceramics. 2015: 15-18. |
| [12] | X. Feng, J. Z. Lv, et al. The application of potassium titanate whisker in the composite materials [J]. Acta Materiae Compositae Sinica, 1999, 16(4): 1-7. |
| [13] | Y. H. Man. Studies on mechanical/tribological properties of potassium hexatitanate whisker/PEEK composites and the interfacial bonding mechanis [D]. Changsha. Powder Metallurgy Institute of Central South University, 2014. 5. |
| [14] | G. Y. Xie, G. X. Sui, R. Yang. Yang R. The effect of applied load on tribological behaviors of potassium titanate whiskers reinforced PEEK composites under water lubricated condition [J]. Tribology letters, 2010, 38(1): 87-96. |
| [15] | Y. X. Lin, et al. The effects of potassium titanate whiskers filled PEEK on the tribological properties [J]. Tribology, 2006, 26(5): 448-451. |
| [16] | X. D. Peng, Y. Lei, H. Y. Ma. Progress in tribology PEEK matrix composites [J]. Journal of the University of Petroleum, 2002, 26(1): 119-122. |
| [17] | M. Li. Study of the Performance of PEEK composite using on Non-lubricated CNG compressor [D]. Shanghai. School of Mechanical Engineering, East China University of Science and Technology, 2012, 1, 11. |
| [18] | Q. H. Wang, et al. The research on friction and wear mechanism of nanometer SiC, SiO2 and Si3N4 filling polyether ether ketone [J]. Functional materials, 1998.10: 964-966. |
| [19] | Q. H. Wang, et al. Sem investigations of worn surfaces and transfer files of PEEK filled with nanometer ZrO2 [J]. CJMR, 1999. 13(1): 107-109. |
| [20] | Q. H. Wang, et al. The effect of nanometer SiC filler on the tribological behavior of PEEK [J]. Wear, 1997, 209(1): 316-321. |
| [21] | A. G. Tian. Nanometer Al2O3 reinforced PEEK composites and their properties [D]. Mechanical Engineering Research Institute, 2002. |
| [22] | E. Z. Li, X. H. Bin, et al. Tribological property of PEEK composites reinforced with glass fiber under water lubricated [J]. Materials engineering, 2014, 3(5): 77-82. |
| [23] | S. Mohit, B. Jayashre, et al. Strengthening of CF/PEEK interface to improve the tribological performance in low amplitude oscillating wear mode [J]. Wear, 2013, 301: 735-739. |
| [24] | L Wu. The preparation of carbon fiber reinforced PEEKcomposites technology and wear resistance and electric conductivity study [J]. Guangdong chemical, 2014. 41(15): 74-75. |
| [25] | X. X. Wu. Tribological properties of carbon fiber reinforeed PEEK [D]. Nan Jing. Nanjing University of Science and Technology, 2012. 3. 27. |
| [26] | LI hao. Preparation and characterization of short carbon fiber reinforced composites [D]. Tian Jin: Tianjin University, 2006. |
| [27] | B. JBRISCOE, et al. The friction and wear of PTFE-PEEK composites: an initial appraisal of the optimum composition [J]. Wear. 1986, 108: 357-374. |
| [28] | B. JBRISCOE, B. J, et al. Boundary lubrication of polymers in model fluids [J]. Tribology Inter, 1984, 17(1): 129-137. |
| [29] | B. JBRISCOE, B. J. Friction and Wear of Polymer Composites [M]. Friedrich K ED, Elesvier, Oxford, 1986. |
| [30] | H. X. Yan, R. C. Ning, Y. Huang. The performance of PEEK composites research [J]. China Plastics Industry, 2002, 30(4): 44-45. |
| [31] | Y. X. Lin, C. H. Gao, Y. Li. Eeffet of CaCO3 whisker and PTFE on dry frietion behavior of PEEK [J]. CJMR, 2007, 6 (2): 643-647. |
| [32] | J. B. Chen, Q. Guo, et al. Research on friction and wear behaviors of PEEK/PEI/PES Plastics alloys under sliding contact condition [J]. Procedia Engineering, 2012, 36: 285-291. |
| [33] | J. B. Chen. Research on structures and properties of ternary high performance plastics alloys PEEK/PEI/PES [D]. Shang hai: Shang hai University, 2013. |
| [34] | Z. Y. Zhang, H. M. Zeng. Study on the friction and wear properties of PEEK/PES-C blends [J]. Plastics, 1993, 22(2): 31-34. |
| [35] | B. Yameen, M. Alvarez, O. Azzaroni, et al. Tailoring of PEEK Surface properties via surface-initiated atom transfer radical polymerization [J]. Langmuir, 2009, 25(11): 6214-6220. |
| [36] | R. C. Chen, H. Sun. G, Z. Xu. Surface Modification and characterization of PEEK [J]. China Plastics, 2011, 25(5): 17-23. |
| [37] | E. H. Lee, M. B. Lew, P. J. Blau, et al. Improved surface properties of polymer materials by multiple ion beam treatment [J]. JMater Res, 1991, 6(3): 610-628. |
| [38] | E. H. Lee, G. R. Rao, L. K. Mansur. Improved hardness and wear properties of bion implanted polycarbonate [J]. JMater Res, 1992, 7(7): 1900-1 911. |
| [39] | Rao G R, Lee E H. Effects of sequential He+ and Ar+ implantation on surface properties of polymers [J]. JMater Res, 1996, 11(10): 2661-2 667. |
| [40] | P. Du, X. M. Yang, M. Li. Surface modification of polyether ether ketone thin films through ion implantation [J]. Journal of Materials Science & Engineering, 2010(4): 481-485. |
| [41] | L W Mu, et al. Effects of nano-and micro-TiO2 on PTFE/PEEK composites tribological performance [J]. Journal of nanjing technology universit. 2014, 36(6): 31-36. |
| [42] | X D Peng, H Y Ma, Q F Zeng, Y Lei. Tribological properties of polyetheretherketone composite materials filled by inorganic nanoparticles and PTFE [J].Tribology, 2004, 24(3): 240-243. |
| [43] | N Ma, G X Sui. The tribological mechanism of short carbon fibers and potassium titanate whiskers reinforced polyetherrtherkrtone composites in dry sliding [J]. Acta Materiae Compositae Sinica, 2013, 30(12): 49-54. |
APA Style
Li Shu Long, Wang Yan Jun, Qin Ke, Li Chao. (2016). Research on Progress of Tribological Modification of Polyetheretherketone. International Journal of Materials Science and Applications, 5(2), 102-107. https://doi.org/10.11648/j.ijmsa.20160502.21
ACS Style
Li Shu Long; Wang Yan Jun; Qin Ke; Li Chao. Research on Progress of Tribological Modification of Polyetheretherketone. Int. J. Mater. Sci. Appl. 2016, 5(2), 102-107. doi: 10.11648/j.ijmsa.20160502.21
AMA Style
Li Shu Long, Wang Yan Jun, Qin Ke, Li Chao. Research on Progress of Tribological Modification of Polyetheretherketone. Int J Mater Sci Appl. 2016;5(2):102-107. doi: 10.11648/j.ijmsa.20160502.21
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ijmsa.20160502.21,
author = {Li Shu Long and Wang Yan Jun and Qin Ke and Li Chao},
title = {Research on Progress of Tribological Modification of Polyetheretherketone},
journal = {International Journal of Materials Science and Applications},
volume = {5},
number = {2},
pages = {102-107},
doi = {10.11648/j.ijmsa.20160502.21},
url = {https://doi.org/10.11648/j.ijmsa.20160502.21},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20160502.21},
abstract = {The characteristics and application of poly ether ether ketone (PEEK) has been reviewed in the paper. The tribological modification of PEEK composites which were reinforced by inorganic fillers, the fiber, polymer blends, plasma and mixed modification were introduced. Finally research progress of tribological modification of PEEK composites was forecasted.},
year = {2016}
}
TY - JOUR T1 - Research on Progress of Tribological Modification of Polyetheretherketone AU - Li Shu Long AU - Wang Yan Jun AU - Qin Ke AU - Li Chao Y1 - 2016/05/09 PY - 2016 N1 - https://doi.org/10.11648/j.ijmsa.20160502.21 DO - 10.11648/j.ijmsa.20160502.21 T2 - International Journal of Materials Science and Applications JF - International Journal of Materials Science and Applications JO - International Journal of Materials Science and Applications SP - 102 EP - 107 PB - Science Publishing Group SN - 2327-2643 UR - https://doi.org/10.11648/j.ijmsa.20160502.21 AB - The characteristics and application of poly ether ether ketone (PEEK) has been reviewed in the paper. The tribological modification of PEEK composites which were reinforced by inorganic fillers, the fiber, polymer blends, plasma and mixed modification were introduced. Finally research progress of tribological modification of PEEK composites was forecasted. VL - 5 IS - 2 ER -
Information
Email: