In order to study the impact resistance of new resin-based fiber composite materials and apply them to the electric vehicle battery PACK box, the dynamic simulation for fiber composite laminates is carried out based on ANSYS ACP module and Explicit Dynamics module. In the calculation of the finite element model, the damage of the material is judged according to the change of the maximum stress and the maximum strain of the top surface about experiment samples. Calculate the difference between the stress or strain of the carbon fiber and the glass fiber at different impact heights to determine whether they have a good resistant ability to impact. Finally, compared with the results of hammer-dropping test, verify the accuracy and reliability of numerical simulation method.
Published in | International Journal of Materials Science and Applications (Volume 6, Issue 6) |
DOI | 10.11648/j.ijmsa.20170606.17 |
Page(s) | 309-315 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2017. Published by Science Publishing Group |
Fiber Composite Materials, ANSYS ACP, Stress and Strain, Impact Test
[1] | ZHANG J H, SHENG Z M, SUN J T. Design Guide of Composites Constructure [M]. Beijing: Beijing Yuhang Publishing Company, 1999. |
[2] | Yan Xiao. The Application of Glass Fiber Composite Materials [J]. Jiangmen Chemical Materials Company (Jiangmen, Guangdong 529100), 2013. |
[3] | Xiao Lu, Haijun Xuan, Lianfang Liao. Simulation of Ballistic Impact on Carbon Fiber Laminate Panels [J]. Material Engineering, 2009. |
[4] | Guozhong Tang, Weiguo Guo, Yulong Li, Fei Xu, Yao Zhao. Research on Dynamic Tensile Test and Impact Resistance of Carbon Fiber Composite Laminates [C]. School of Aeronautics, Northwestern Polytechnical University, 2008. |
[5] | Jianli Cai, Huan Yu, Yunying Wang. Damage Resistance of Low Velocity Impacted on Foam-core Sandwich Structure Composites [D]. Jianli Cai. Nanchang Aeronautical University, 2011. |
[6] | Boru Li, Guimin Qu. Research of the Impact Performance of Glass Fiber Reinforced Aluminium Laminates [D]. Boru Li. Harbin Polytechnic University, 2015. |
[7] | Marie-Laure Dano, Elhassania Kamal, Guy Gendron. Analisis of bolted joints in composite laminates: strains and bearing stiffness predictions [J]. Compos Struct, 2000, 79: 562-570. |
[8] | Peng Zhou, Deyuan Zhou. Study on Accuracy of Simulation Analysis of Guardrail Impact based on ANSYS/LS-DYNA [J]. Vibration and shock. 2008 (04). |
[9] | Wei Li, Quanfeng Guo. Application of carbon fiber composites to cosmonautic fields. Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China. |
[10] | Xiuli Wang, Junjie Li, Zhigang Lv. Research on Impact Resistance Performance of New-style Debris Flow-resisting Dams with Braces Based on ANSYS/LS-DYNA [J]. Journal of Disaster Prevention and Mitigation Engineering, 2014. |
[11] | Bingjie Zhou, Wei Li. Research on Carbon Fiber Laminates for Impact Damage Property and Pedestrian Head Protection [D]. Bingjie Zhou. Donghua University, 2015. |
[12] | Xiangdong Yang, Jiaqiang Xu, Hao Tao. Study on Impact Properties of Carbon Fiber Reinforced Polymer Laminate [J]. Journal of Zhengzhou University of Light Industry, 1997. |
[13] | Xiaohong Zhang, Feng Zhou, Qi Feng. Design of Carbon Fiber Cabinet for Vehicle Power Battery [J]. Shanghai Vehicles, 2014. |
[14] | Determination of material parameters for Abaqus progressive damage analysis of E-glass epoxy laminates [J]. E. J. Barbero, F. A. Cosso, R. Roman, T. L. Weadon. Composites Part B. 2013. |
[15] | Standard test method for measuring the damage resistance of a fiber-reinforced polymer matrix composite to a drop-weight impact event. American Society for Testing and Materials. ASTM D7136/D7136 M-12. 2012. |
[16] | Mingyang Xiong, Zhong Xiang, Xudong Hu. Numerical Simulation of Low - speed Impact Failure of CCF300 Carbon Fiber Laminates Based on ABAQUS [J]. Light Industry Machinery, 2017. |
[17] | Finite Element simulation of carbon fibre-reinforced composite laminates subjected to low velocity impact using damage induced static load-deflection methodology [J]. Umar Farooq, Peter Myler. Thin-Walled Structures. 2015. |
[18] | Delamination prediction in composite laminates under low-velocity impact [J]. Shuchang Long, Xiaohu Yao, Xiaoqing Zhang. Composite Structures. 2015. |
[19] | Composite damage model based on continuum damage mechanics and low velocity impact analysis of composite plates [J]. Eun-Ho Kim, Mi-Sun Rim, In Lee, Tae-Kyung Hwang. Composite Structures. 2013. |
APA Style
Hebin Hu, Xueliang Bian, Xiaoyan Cao, Wenqi Shen, Bing Li. (2017). Impact Properties Study of Fibre Reinforced Resin Matrix Composites. International Journal of Materials Science and Applications, 6(6), 309-315. https://doi.org/10.11648/j.ijmsa.20170606.17
ACS Style
Hebin Hu; Xueliang Bian; Xiaoyan Cao; Wenqi Shen; Bing Li. Impact Properties Study of Fibre Reinforced Resin Matrix Composites. Int. J. Mater. Sci. Appl. 2017, 6(6), 309-315. doi: 10.11648/j.ijmsa.20170606.17
AMA Style
Hebin Hu, Xueliang Bian, Xiaoyan Cao, Wenqi Shen, Bing Li. Impact Properties Study of Fibre Reinforced Resin Matrix Composites. Int J Mater Sci Appl. 2017;6(6):309-315. doi: 10.11648/j.ijmsa.20170606.17
@article{10.11648/j.ijmsa.20170606.17, author = {Hebin Hu and Xueliang Bian and Xiaoyan Cao and Wenqi Shen and Bing Li}, title = {Impact Properties Study of Fibre Reinforced Resin Matrix Composites}, journal = {International Journal of Materials Science and Applications}, volume = {6}, number = {6}, pages = {309-315}, doi = {10.11648/j.ijmsa.20170606.17}, url = {https://doi.org/10.11648/j.ijmsa.20170606.17}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20170606.17}, abstract = {In order to study the impact resistance of new resin-based fiber composite materials and apply them to the electric vehicle battery PACK box, the dynamic simulation for fiber composite laminates is carried out based on ANSYS ACP module and Explicit Dynamics module. In the calculation of the finite element model, the damage of the material is judged according to the change of the maximum stress and the maximum strain of the top surface about experiment samples. Calculate the difference between the stress or strain of the carbon fiber and the glass fiber at different impact heights to determine whether they have a good resistant ability to impact. Finally, compared with the results of hammer-dropping test, verify the accuracy and reliability of numerical simulation method.}, year = {2017} }
TY - JOUR T1 - Impact Properties Study of Fibre Reinforced Resin Matrix Composites AU - Hebin Hu AU - Xueliang Bian AU - Xiaoyan Cao AU - Wenqi Shen AU - Bing Li Y1 - 2017/12/06 PY - 2017 N1 - https://doi.org/10.11648/j.ijmsa.20170606.17 DO - 10.11648/j.ijmsa.20170606.17 T2 - International Journal of Materials Science and Applications JF - International Journal of Materials Science and Applications JO - International Journal of Materials Science and Applications SP - 309 EP - 315 PB - Science Publishing Group SN - 2327-2643 UR - https://doi.org/10.11648/j.ijmsa.20170606.17 AB - In order to study the impact resistance of new resin-based fiber composite materials and apply them to the electric vehicle battery PACK box, the dynamic simulation for fiber composite laminates is carried out based on ANSYS ACP module and Explicit Dynamics module. In the calculation of the finite element model, the damage of the material is judged according to the change of the maximum stress and the maximum strain of the top surface about experiment samples. Calculate the difference between the stress or strain of the carbon fiber and the glass fiber at different impact heights to determine whether they have a good resistant ability to impact. Finally, compared with the results of hammer-dropping test, verify the accuracy and reliability of numerical simulation method. VL - 6 IS - 6 ER -