| Peer-Reviewed

Manufacturing of Ø 1,000 Grade Large Diameter Round Bloom and Development of Cost Effective Hot Forging Process Using the Round Bloom

Received: 1 December 2017     Accepted: 12 December 2017     Published: 17 January 2018
Views:       Downloads:
Abstract

Taewoong is an open die forging company, specialized in the production of hot forged and ring rolled parts. Recently, Taewoong utilized continuous casting facilities that can manufacture Ø 1,000 grade large diameter round bloom to increase competitiveness of the company. This study focuses installed continuous casting facilities and ring rolling process using manufactured Ø 1,000 grade round bloom. Constitution of installed facilities was introduced and characteristics of the facilities, EAF (Electric Arc Furnace), LF (Ladle Furnace), VD (Vacuum Degassing), VOD (Vacuum Oxygen Decarburization) and CC (Continuous Casting) were described. Also, ring rolling experiments were performed using manufactured Ø 1,000 grade round bloom. Hot forging process design was performed to fabricate sound products. Work sequence design was performed using FE analysis software and optimal forging work sequence was derived. With the results, sound forged parts were formed and improvement of competitiveness was verified. Raw material recovery ratio was increased and the number of process and processing time were decreased. The results show utilized continuous cast facilities give opportunity to be a world competitive company by increasing competitiveness of the company.

Published in International Journal of Materials Science and Applications (Volume 7, Issue 1)
DOI 10.11648/j.ijmsa.20180701.15
Page(s) 28-32
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2018. Published by Science Publishing Group

Keywords

Continuous Casting, Ø 1,000 Grade, Large Diameter Round Bloom, Hot Forging, Ring Rolling, Cost Reduction

References
[1] G. Zhau, L. Hau, D. H. Qian and H. X. Li, Effects of axial rolls motions on radial–axial rolling process for large-scale alloy steel ring with 3D coupled thermo-mechanical FEA, International Journal of Mechanical Sciences (2012, Volume 59) pp. 1-7.
[2] M. S. Joun, J. H. Chung and R. Shivpuri, An axisymmetric forging approach to preform design in ring rolling using a rigid–viscoplastic finite element method, International Journal of Machine Tools and Manufacture (1998, Volume 38), pp. 1183-1191.
[3] J. T. Yeom, J. H. Kim, N. K. Park, S. S. Choi and C. S. Lee, Ring-rolling design for a large-scale ring product of Ti–6Al–4V alloy, Journal of Materials Processing Technology (2007, Volume 187-188), pp. 747-751.
[4] J. L. Song, A. L. Dowson, M. H. Jacobs, J. Brooks and I. Beden, Coupled thermo-mechanical finite-element modelling of hot ring rolling process, Journal of Materials Processing Technology (2002, Volume 121), pp. 332-340.
[5] K. Suresh, K. P. Rao, Y. V. R. K. Prasad, N. Hort and K. U. Kainer, Study of hot forging behavior of as-cast Mg–3Al–1Zn–2Ca alloy towards optimization of its hot workability. Materials & Design (2014, Volume 57), pp. 697-704.
[6] V. Imayev, R. Gaisin, E. Gaisina, R. Imayev, H. J. Fecht and F. Pyczak, Effect of hot forging on microstructure and tensile properties of Ti–TiB based composites produced by casting. Materials Science and Engineering: A (2014, Volume 609), pp. 34-41.
[7] F. Chen, F. Ren, J. Chen, Z. Cui and H. Ou, Microstructural modeling and numerical simulation of multi-physical fields for martensitic stainless steel during hot forging process of turbine blade. The International Journal of Advanced Manufacturing Technology (2016 Volume 82), pp. 85-98.
[8] T. R. Prabhu, Simulations and Experiments of Hot Forging Design and Evaluation of the Aircraft Landing Gear Barrel Al Alloy Structure. Journal of Materials Engineering and Performance (2016, Volume 25), pp. 1257-1268.
[9] S. Casotto, F. Pascon, A. M. Habraken, S. Bruschi, Thermo-mechanical-metallurgical model to predict geometrical distortions of rings during cooling phase after ring rolling operations, International Journal of Machine Tools and Manufacture (2005, Volume 45), pp. 657-664.
[10] K. H. Kim, H. G. Suk and M. Y. Huh, Development of the profile ring rolling process for large slewing rings of alloy steels, Journal of Materials Processing Technology (2007, Volume 187-188), pp. 730-733.
Cite This Article
  • APA Style

    Hisang Chang, Jinmo Lee, Namyong Kim, Chaehun Lee, Sanghyun Heo, et al. (2018). Manufacturing of Ø 1,000 Grade Large Diameter Round Bloom and Development of Cost Effective Hot Forging Process Using the Round Bloom. International Journal of Materials Science and Applications, 7(1), 28-32. https://doi.org/10.11648/j.ijmsa.20180701.15

    Copy | Download

    ACS Style

    Hisang Chang; Jinmo Lee; Namyong Kim; Chaehun Lee; Sanghyun Heo, et al. Manufacturing of Ø 1,000 Grade Large Diameter Round Bloom and Development of Cost Effective Hot Forging Process Using the Round Bloom. Int. J. Mater. Sci. Appl. 2018, 7(1), 28-32. doi: 10.11648/j.ijmsa.20180701.15

    Copy | Download

    AMA Style

    Hisang Chang, Jinmo Lee, Namyong Kim, Chaehun Lee, Sanghyun Heo, et al. Manufacturing of Ø 1,000 Grade Large Diameter Round Bloom and Development of Cost Effective Hot Forging Process Using the Round Bloom. Int J Mater Sci Appl. 2018;7(1):28-32. doi: 10.11648/j.ijmsa.20180701.15

    Copy | Download

  • @article{10.11648/j.ijmsa.20180701.15,
      author = {Hisang Chang and Jinmo Lee and Namyong Kim and Chaehun Lee and Sanghyun Heo and Sunryong Yoon and Byeong Don Joo},
      title = {Manufacturing of Ø 1,000 Grade Large Diameter Round Bloom and Development of Cost Effective Hot Forging Process Using the Round Bloom},
      journal = {International Journal of Materials Science and Applications},
      volume = {7},
      number = {1},
      pages = {28-32},
      doi = {10.11648/j.ijmsa.20180701.15},
      url = {https://doi.org/10.11648/j.ijmsa.20180701.15},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20180701.15},
      abstract = {Taewoong is an open die forging company, specialized in the production of hot forged and ring rolled parts. Recently, Taewoong utilized continuous casting facilities that can manufacture Ø 1,000 grade large diameter round bloom to increase competitiveness of the company. This study focuses installed continuous casting facilities and ring rolling process using manufactured Ø 1,000 grade round bloom. Constitution of installed facilities was introduced and characteristics of the facilities, EAF (Electric Arc Furnace), LF (Ladle Furnace), VD (Vacuum Degassing), VOD (Vacuum Oxygen Decarburization) and CC (Continuous Casting) were described. Also, ring rolling experiments were performed using manufactured Ø 1,000 grade round bloom. Hot forging process design was performed to fabricate sound products. Work sequence design was performed using FE analysis software and optimal forging work sequence was derived. With the results, sound forged parts were formed and improvement of competitiveness was verified. Raw material recovery ratio was increased and the number of process and processing time were decreased. The results show utilized continuous cast facilities give opportunity to be a world competitive company by increasing competitiveness of the company.},
     year = {2018}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Manufacturing of Ø 1,000 Grade Large Diameter Round Bloom and Development of Cost Effective Hot Forging Process Using the Round Bloom
    AU  - Hisang Chang
    AU  - Jinmo Lee
    AU  - Namyong Kim
    AU  - Chaehun Lee
    AU  - Sanghyun Heo
    AU  - Sunryong Yoon
    AU  - Byeong Don Joo
    Y1  - 2018/01/17
    PY  - 2018
    N1  - https://doi.org/10.11648/j.ijmsa.20180701.15
    DO  - 10.11648/j.ijmsa.20180701.15
    T2  - International Journal of Materials Science and Applications
    JF  - International Journal of Materials Science and Applications
    JO  - International Journal of Materials Science and Applications
    SP  - 28
    EP  - 32
    PB  - Science Publishing Group
    SN  - 2327-2643
    UR  - https://doi.org/10.11648/j.ijmsa.20180701.15
    AB  - Taewoong is an open die forging company, specialized in the production of hot forged and ring rolled parts. Recently, Taewoong utilized continuous casting facilities that can manufacture Ø 1,000 grade large diameter round bloom to increase competitiveness of the company. This study focuses installed continuous casting facilities and ring rolling process using manufactured Ø 1,000 grade round bloom. Constitution of installed facilities was introduced and characteristics of the facilities, EAF (Electric Arc Furnace), LF (Ladle Furnace), VD (Vacuum Degassing), VOD (Vacuum Oxygen Decarburization) and CC (Continuous Casting) were described. Also, ring rolling experiments were performed using manufactured Ø 1,000 grade round bloom. Hot forging process design was performed to fabricate sound products. Work sequence design was performed using FE analysis software and optimal forging work sequence was derived. With the results, sound forged parts were formed and improvement of competitiveness was verified. Raw material recovery ratio was increased and the number of process and processing time were decreased. The results show utilized continuous cast facilities give opportunity to be a world competitive company by increasing competitiveness of the company.
    VL  - 7
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Research and Development Center, Taewoong, Busan, Republic of Korea

  • Research and Development Center, Taewoong, Busan, Republic of Korea

  • Research and Development Center, Taewoong, Busan, Republic of Korea

  • Research and Development Center, Taewoong, Busan, Republic of Korea

  • Research and Development Center, Taewoong, Busan, Republic of Korea

  • Research and Development Center, Taewoong, Busan, Republic of Korea

  • Research and Development Center, Taewoong, Busan, Republic of Korea

  • Sections