Research Article | | Peer-Reviewed

Development of Wireless Charging System Using Square-Circular Coupled Coils with Different Misalignments

Received: 22 August 2023     Accepted: 8 September 2023     Published: 21 February 2024
Views:       Downloads:
Abstract

Now a days, inductive power transfer (IPT) has gained a lot of attention from researchers as it has ease of use and realiability for electric vehicle (EV) battery charging systems. This paper examines the increasing attention from researchers towards inductive power transfer (IPT) as a means of charging electric vehicle (EV) batteries. This interest originates from the user-friendly characteristics and notable reliability associated with IPT. The evaluation of mutual inductance (MI) holds importance within the domain of Inductive Power Transfer (IPT) systems, as it serves a critical function in enabling effective power transfer. Therefore, it is essential to perform a comprehensive analysis of the mutual inductance between the two coils that are connected through inductive coupling. This study provides an examination of mutual inductance (MI) and efficiency within the context of interoperability conditions of interconnected coils. The transmitter coil is represented as a square structure, denoted as TxS, whereas the receiving coil is represented as a circular structure, denoted as RxC. Furthermore, the application of ferrite cores and steel chassis inclosures, in combination with coils, is utilised for the objective of electric vehicle (EV) battery charging. The magnetic induction (MI) analysis is performed by the utilisation of finite element method (FEM) simulation. The finite element method (FEM) simulation outcomes of the interconnected coils with misalignments, encompassing both non-core and steel chassis configurations, are juxtaposed with the corresponding empirical observations.

Published in Journal of Electrical and Electronic Engineering (Volume 12, Issue 1)
DOI 10.11648/j.jeee.20241201.12
Page(s) 12-22
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Interoperability, Mutual Inductance (MI), Finite Element Modeling (FEM), Inductive Power Transfer (IPT)

References
[1] W. C. Brown, "The History of Power Transmission by Radio Waves," IEEE Trans. Microwave Theory Tech., Vol. 32, pp. 1230-1242, 1984.
[2] S. Li and C. Mi, "Wireless Power Transfer for Electric Vehicle Applications" IEEE Journal on Emerging and Selected Topics in Power Electronics, Vol. 3. pp. 4-17, 2015.
[3] A. P. Sample, D. A. Meyer, and J. R. Smith, "Analysis, Experimental Results, and Range Adaptation of Magnetically Coupled Resonators for Wireless Power Transfer," IEEE Trans. on Industrial Electronics., Vol. 58, pp. 544-554, 2011.
[4] Xiaohui Qu, Yanyan Jing, Hongdou Han, Siu-Chung Wong and Chi K. Tse “Higher Order Compensation for Inductive-Power-Transfer Converters with Constant-Voltage or Constant-Current Output Combating Transformer Parameter Constraints” IEEE Trans. on Power Electronics, Vol. 32, pp: 394 – 405, 2017.
[5] R. Bukya, B. Mangu, A. Jayaprakash and J. Ramesh, "A Study on Current-fed Topology for Wireless Resonant Inductive Power Transfer Battery Charging System of Electric Vehicle," 2020 International Conference on Power Electronics & IoT Applications in Renewable Energy and its Control (PARC), Mathura, India, 2020, pp. 415-421.
[6] L. Huang, G. Meunier, O. Chadebec, J. M. Guichon, Y. Li and Z. He, "General Integral Formulation of Magnetic Flux Computation and Its Application to Inductive Power Transfer System," in IEEE Transactions on Magnetics, vol. 53, no. 6, pp. 1-4, June 2017.
[7] S. I. Babic, F. Sirois and C. Akeyl “Validity Check of Mutual Inductance for Circular Filaments with Lateral and Planar Misalignment” Progress In Electromagnetics Research M, Vol. 8, pp. 15-26, 2009.
[8] Adel Moradi, Farzad Tahami, Mohammad Ali Ghazi Moghadam “Wireless Power Transfer Using Selected Harmonic Resonance Mode” IEEE Trans. on Transportation Electrification, Vol. 3, pp: 508-519, 2017.
[9] Sanghoon Cheon, Yong-Hae Kim, Seung-Youl Kang, Myung Lae Lee, Jong-Moo Lee and Taehyoung Zyung “Circuit-Model-Based Analysis of A Wireless Energy Transfer System Via Coupled Magnetic Resonances,” IEEE Trans. on Industrial Electronics, Vol. 58, 2906–2914, 2011.
[10] Ezhil reena joy, Brijesh kumar, Gautam Rituraj and Praveen Kumar “Impact of Circuit Parameters in Contactless Power Transfer System” IEEE Conference (PEDES), 2014.
[11] Roman Boss hard, and Johann W. Kolar “Multi-Objective Optimization of 50 kW/85 kHz IPT System for Public Transport” IEEE Journal of Emerging and Selected Topics in Power Electronics, Vol. 4, pp: 1370-1382, 2016.
[12] P Nayak, Kishan Dharavath, Sathish P “ Investigation of mutual inductance between circular spiral coils with misalignments for electric vehicle battery charging” IET Science, Measurement & Technology, https://doi.org/10.1049/iet-smt.2017.0421
[13] Fei Yang Lin, Claudio Carretero, Grant A. Covic, and John T. Boys “A Reduced Order Model to Determine the Coupling Factor Between Magnetic Pads Used in Wireless Power Transfer” IEEE Trans. on Transportation Electrification, Vol. 3, pp: 321–331, 2017.
[14] Sándor Bilicz, Zsolt Badics, Szabolcs Gyimóthy, and József Pávó “Modeling of Dense Windings for Resonant Wireless Power Transfer by an Integral Equation Formulation” IEEE Transactions On Magnetics, Vol. 53, No. 6, 2017.
[15] Yang Han and Xiaoping Wang “Calculation of Mutual Inductance Based on 3D Field and Circuit Coupling Analysis for WPT System” International Journal of Control and Automation Vol. 8, pp. 251-266, 2015.
[16] J. P. C. Smeets, T. T. Overboom, J. W. Jansen, and E. A. Lomonova, “Inductance calculation nearby conducting material,” IEEE Trans. on Magnetics, Vol. 50, 2014.
[17] H. V. Alizadeh and B. Boulet, “Analytical calculation of the magnetic vector potential of an axisymmetric solenoid in the presence of iron parts,” IEEE Trans. Magnetics, Vol. 52, 2016.
[18] Brijesh Kushwaha, Gautam Rituraj, Praveen Kumar “3-D Analytical Model for Computation of Mutual Inductance for Different Misalignment with Shielding in Wireless Power Transfer System” IEEE Trans. on Transportation Electrification, Vol: 3 pp: 332-342, 2017.
[19] Ahmed A. S. Mohamed, A. A. Marim, and O. A. Mohammed “Magnetic Design Considerations of Bidirectional Inductive Wireless Power Transfer System for EV Applications” IEEE Trans. on Magnetics, Vol. 53, June 2017.
[20] Hurley, W. G, Duffy M. C, Zhang, J, Lope, I, Kunz, B, Wolfle W. H., "A Unified Approach to the Calculation of Self- and Mutual-Inductance for Coaxial Coils in Air," IEEE Trans. on Power Electronics, Vol. 30, pp. 6155-6162, 2015.
Cite This Article
  • APA Style

    Bukya, R. (2024). Development of Wireless Charging System Using Square-Circular Coupled Coils with Different Misalignments. Journal of Electrical and Electronic Engineering, 12(1), 12-22. https://doi.org/10.11648/j.jeee.20241201.12

    Copy | Download

    ACS Style

    Bukya, R. Development of Wireless Charging System Using Square-Circular Coupled Coils with Different Misalignments. J. Electr. Electron. Eng. 2024, 12(1), 12-22. doi: 10.11648/j.jeee.20241201.12

    Copy | Download

    AMA Style

    Bukya R. Development of Wireless Charging System Using Square-Circular Coupled Coils with Different Misalignments. J Electr Electron Eng. 2024;12(1):12-22. doi: 10.11648/j.jeee.20241201.12

    Copy | Download

  • @article{10.11648/j.jeee.20241201.12,
      author = {Ravi Bukya},
      title = {Development of Wireless Charging System Using Square-Circular Coupled Coils with Different Misalignments},
      journal = {Journal of Electrical and Electronic Engineering},
      volume = {12},
      number = {1},
      pages = {12-22},
      doi = {10.11648/j.jeee.20241201.12},
      url = {https://doi.org/10.11648/j.jeee.20241201.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20241201.12},
      abstract = {Now a days, inductive power transfer (IPT) has gained a lot of attention from researchers as it has ease of use and realiability for electric vehicle (EV) battery charging systems. This paper examines the increasing attention from researchers towards inductive power transfer (IPT) as a means of charging electric vehicle (EV) batteries. This interest originates from the user-friendly characteristics and notable reliability associated with IPT. The evaluation of mutual inductance (MI) holds importance within the domain of Inductive Power Transfer (IPT) systems, as it serves a critical function in enabling effective power transfer. Therefore, it is essential to perform a comprehensive analysis of the mutual inductance between the two coils that are connected through inductive coupling. This study provides an examination of mutual inductance (MI) and efficiency within the context of interoperability conditions of interconnected coils. The transmitter coil is represented as a square structure, denoted as TxS, whereas the receiving coil is represented as a circular structure, denoted as RxC. Furthermore, the application of ferrite cores and steel chassis inclosures, in combination with coils, is utilised for the objective of electric vehicle (EV) battery charging. The magnetic induction (MI) analysis is performed by the utilisation of finite element method (FEM) simulation. The finite element method (FEM) simulation outcomes of the interconnected coils with misalignments, encompassing both non-core and steel chassis configurations, are juxtaposed with the corresponding empirical observations.
    },
     year = {2024}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Development of Wireless Charging System Using Square-Circular Coupled Coils with Different Misalignments
    AU  - Ravi Bukya
    Y1  - 2024/02/21
    PY  - 2024
    N1  - https://doi.org/10.11648/j.jeee.20241201.12
    DO  - 10.11648/j.jeee.20241201.12
    T2  - Journal of Electrical and Electronic Engineering
    JF  - Journal of Electrical and Electronic Engineering
    JO  - Journal of Electrical and Electronic Engineering
    SP  - 12
    EP  - 22
    PB  - Science Publishing Group
    SN  - 2329-1605
    UR  - https://doi.org/10.11648/j.jeee.20241201.12
    AB  - Now a days, inductive power transfer (IPT) has gained a lot of attention from researchers as it has ease of use and realiability for electric vehicle (EV) battery charging systems. This paper examines the increasing attention from researchers towards inductive power transfer (IPT) as a means of charging electric vehicle (EV) batteries. This interest originates from the user-friendly characteristics and notable reliability associated with IPT. The evaluation of mutual inductance (MI) holds importance within the domain of Inductive Power Transfer (IPT) systems, as it serves a critical function in enabling effective power transfer. Therefore, it is essential to perform a comprehensive analysis of the mutual inductance between the two coils that are connected through inductive coupling. This study provides an examination of mutual inductance (MI) and efficiency within the context of interoperability conditions of interconnected coils. The transmitter coil is represented as a square structure, denoted as TxS, whereas the receiving coil is represented as a circular structure, denoted as RxC. Furthermore, the application of ferrite cores and steel chassis inclosures, in combination with coils, is utilised for the objective of electric vehicle (EV) battery charging. The magnetic induction (MI) analysis is performed by the utilisation of finite element method (FEM) simulation. The finite element method (FEM) simulation outcomes of the interconnected coils with misalignments, encompassing both non-core and steel chassis configurations, are juxtaposed with the corresponding empirical observations.
    
    VL  - 12
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Electrical and Electronic Engineering, Malla Reddy College of Engineeringand Technology (A), JNTU Hyderabad, Telangana, India

  • Sections