Research Article
Analysis of Turbulent Natural Convection of Heat Transfer with Localized Heating and Cooling on Opposite Surfaces of a Vertical Cylinder with Varying Aspect Ratio
Issue:
Volume 13, Issue 6, December 2025
Pages:
365-392
Received:
12 October 2025
Accepted:
21 October 2025
Published:
22 November 2025
DOI:
10.11648/j.ajam.20251306.11
Downloads:
Views:
Abstract: This study involves analysis of turbulent natural convection of heat transfer with localized heating and cooling on opposite surfaces of a vertical cylinder. Numerical simulation of turbulent natural convection has been studied in the past using the k-epsilon (k-ε), k-omega (k-ω) and k-ω-SST turbulence models. Further research showed that the k-ω SST model performed better than the k-ε and k-ω models. The study of natural convections in an enclosure has several applications from natural space, warming of household rooms to sections of engineering and atomic installations. This study involves numerical simulation of natural convection flow in a cylindrical enclosure full of air using the k-ω-SST model with an objective of establishing the best position of the heater and the cooler for better distribution of heat in the enclosure. The transfer of heat due to natural convection inside a cylindrical closed cavity was modeled to include the effect of Rayleigh number. The non-linear terms in averaged momentum and energy equation respectively were modeled using k-ω-SST model to close the governing equations. The sidewalls were adiabatic, while the bottom and top surfaces are maintained at 320 K and 298 K, respectively, to induce natural convection. The governing equations, Reynolds-average Navier-Stokes (RANS), energy and turbulence transport, were discretized using the central finite difference method under the Boussinesq approximation. A low Reynolds number k-ω SST turbulence model was employed to accurately resolve turbulent effects. The study explored a range of aspect ratios (AR = 1, 2, 4, 8) while holding the Rayleigh number constant within the turbulent regime Ra =1010 and assuming Prandtl number of 0.71. Simulations were conducted in ANSYS Fluent to obtain vector plot of velocity magnitude, contours of temperature distribution, streamline distributions, effective thermal conductivity, and intensity of turbulence. Results revealed that increasing AR leads to reduced turbulence, weaker convective strength, more stratified temperature fields, and diminished heat transfer efficiency. The findings highlight the critical role of the geometry of the enclosure in shaping the flow structure and thermal behavior in turbulent natural convection.
Abstract: This study involves analysis of turbulent natural convection of heat transfer with localized heating and cooling on opposite surfaces of a vertical cylinder. Numerical simulation of turbulent natural convection has been studied in the past using the k-epsilon (k-ε), k-omega (k-ω) and k-ω-SST turbulence models. Further research showed that the k-ω S...
Show More
,
Johana Kibet Sigey
